ADA compliant fixed tilt frame mirrors are easy to assemble and install. The standard flat commercial washroom mirror slides readily into the tilt frame.
The innovative design and fabrication method results in an ADA fixed tilt frame mirrors with superior breakage and moisture resistance. Fixed tilt frame mirrors consist of one universal frame mirror and one fixed tilt frame. The universal frame mirror readily snaps into the frame to create the fully ADA-compliant fixed tilt frame mirror.
Mirrors are fabricated from one piece, 18 ga., 5/8 inch x 5/8 inch type 304, satin finish, stainless steel angle frame with tightly mitered corners.
Mirror edges are protected by cushioned adhesive strips to prevent damage.
Mirror back is galvanized steel and sealed by continuously applied industrial adhesive.
Mirror is secured to wall by 2 vandal/theft resistant brackets.
1/4” float glass mirror is silvered and electrolytically copper plated by galvanic process, Mirrors meet Fed. Spec. DDM-411, DD-G-451d, ANSI 2-97.1-1983 and CPSC-Cat 2-16 CFR.
